PILOT RC DEALS 2.2M (87IN) VIPERJET V2 W/RETRACTS (BLUE/LIME GREEN 13)

Limited timeframe special offer, please ring for availability
WAREHOUSE STOCK (3-5 DAYS)

Please note: photos shown for colour scheme purposes actual model may vary.

FEATURES:

• Full composite construction, lightweight and strong
• Removable rudder, two piece wing and two piece stabiliser all for easy transport
• Painted outside the mold so no seam lines
• Pre-installed tubes for servo extension leads
• Servo operated gear doors

DESCRIPTION

Viperjets are synonymous for a great flying jet, and this one really fulfils with expectations. Fast, slow, scale, acrobatic, fun, easy, it simply ticks all the boxes for your next jet!

INCLUDED HARDWARE

• Complete air frame (including aluminium wing-tubes and fibreglass control horns)
• Pilot-RC electric retracts and electric brakes
• Scale cockpit (minus pilot)
• Dual wall tail pipe (for 80-140N turbines)
• Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
• Aluminium air trap UAT
• Logo Decals

Any logos included at time of shipping are stickers, not paint.

REQUIRED HARDWARE

Turbine: 80-140N

Servos: 8 high torque (minimum 20kg) // Uses x1 per aileron, x1 per flap, x1 per elevator, x1 on rudder and x1 for steering

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.

RECOMMENDED HARDWARE

Servos: 7 x MacGregor MGB6928HV2 28Kg/0.05s HV Brushless Digital Servo or 7 x Pilot-RC PW-28AH 28.7kg.cm/0.056s High Torque Brushless Servo (x1 per aileron, x1 per flap, x1 per elevator, x1 on rudder)
1 x MacGregor MG2810HV 10.0Kg/0.07s High Voltage Digital Servo (For Steering).

Servo arms: Pilot-RC 1.2in Aluminium arms – PIL556 (included with Pilot-RC servos)

Simple Servo Adjuster – PIL675 (Use single channel for gear and doors)

SPECIFICATION:

Aileron: 20mm, Rudder: 25mm, Elevator: 20mm. Flap: 35mm for take off and 65mm for landing.

The CG is 160-177mm from the front leading edge on the root of the wing.