FrSky Archer Plus R6 LITE 2.4G 6CH ACCESS / ACCST Receiver

The Archer Plus R6 LITE features a compact single-antenna design rather than the dual diversity antenna arrangement found on the standard Archer Plus R6, making it a smaller and more cost-effective alternative.

The Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series.

The Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to existing anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power & Signal related) can be well preserved.

The AP Lite-series 6-channel receivers feature a compact and lightweight design and are equipped with a 2.4GHz signal antenna. The R6 LITE includes six standard 3-pin PWM output channels on one end, while the opposite end provides additional connectivity through SBUS In, SBUS Out, S.Port / FBUS, and AIN interfaces. Using the included adapter cable, these ports allow flexible integration for telemetry, redundancy, expanded channel output, and different system configurations.

Through the specific S.Port cable, the receivers can be easily connected to a transmitter with an S.Port for the firmware upgrade, or sensors for the telemetry. When the S.Port is set to FBUS mode through the ETHOS system, the setting features of all FBUS-capable devices in the link can now be directly configured through the ETHOS system using Lua script tools, and in FBUS mode, the receivers can output 24 signal channels in total.

Features:

• Enhanced Anti-RF-Interference Capability with More Solid RF Performance
• Smart-matched ACCESS & ACCST D16 modes
• 6 High-precision PWM Channel Ports
• SBUS Out Port (Supports 16CH/24CH mode)
• SBUS In Port (Supports Signal Redundancy)
• Full Control Range with Telemetry (FBUS/F.Port/S.Port)
• Over-The-Air (OTA) Firmware Update
• External Battery/Device Voltage Detection

(*Some features require the support of ACCESS and ETHOS.)

** 4in1 / Multiprotocol – supported only with firmware 1.3.3.29 and above *

• Dimension: 45×18.5×9mm (L×W×H)
• Weight: 5.6g
• Number of Channels: 6/24 channels
• Operating Voltage Range: 3.5~10V
• Operating Current: ＜65mA@5V
• Operating Range: ＞2km (Full range) (*Range may vary based on local conditions.)
• Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)
• Antenna Connector: IPEX1
• Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters